Famfon Inji ...

GABATARWA:
Tsarin famfon centrifugal na Model IS jerin matakala ɗaya mai tsotsawa ɗaya mai mataki ɗaya kamfanin ne kawai bisa ga ƙa'idodin ƙasa da ƙasa na 1802858 da kuma sabon tsarin ƙasa na GB/T 5767. Tsarinsa mai nasara na sabbin samfuran da ke amfani da makamashi mai inganci, sigogin aikinsa na asali nau'in famfon ruwa mai centrifugal na asali ne kuma yana da faɗi, tsarin node na ciki da kuma bayyanar gabaɗaya shine ƙirar fa'idodin haɗakarwa nau'in famfon ruwa mai centrifugal da famfon kwance na yanzu, famfon cantilever, ba tare da la'akari da sigogin aiki da tsarin ciki ba da kuma bayyanar gabaɗaya yana da kyau kuma abin dogaro.
Jerin ya ƙunshi daidaitaccen IS02858 na dukkan nau'ikan samfura, kuma don ƙara diamita na shigarwa sama da 250 (ya ƙunshi ma'aunin 250) nau'ikan samfura, ta hanyar yanke impeller da kuma daidaita saurin juyawa, ana iya samun nau'ikan samfura 170 don biyan buƙatun ruwa na kowane fanni na rayuwa.
Ana iya amfani da wannan jerin famfunan don jigilar ruwa ko makamancin halayen jiki da sinadarai na ruwa da ruwa mai ɗauke da barbashi masu ƙarfi. Wannan jerin famfunan na iya zama bisa ga ainihin buƙatun ƙira da ƙera famfon ruwan zafi na ISR kuma nau'in famfon mai ne; samfurin famfunan yana aiki a matsakaicin zafin jiki yana ƙasa da t 80, aikace-aikacen famfon nau'in ISR a matsakaicin zafin jiki na 100″C a ƙasa, ana amfani da famfon nau'in ISY don jigilar mai, dizal oi1 da mai mai sauƙi. Matsakaicin kwararar famfon jerin shine 3.4 –1440m' / h, kewayon kai zuwa 3.7 -133m. Ana iya raba shi da saurin gudu na yau da kullun (gudun 2900rpm) da saurin raguwa (1450rpm), bisa ga tsarin yanke impel1er za a iya raba shi zuwa nau'in O, nau'in A da nau'in B, da samfurin impeller nau'in O. Nau'in A shine impeller yanke sau ɗaya, B don impeller yanke na biyu.

YANAYIN AMFANI:

1. Matsakaicin matsin lamba na famfo (matsakaicin matsin lamba na shigarwa da aka yarda + matsin lamba na ƙirar famfo) <1.6Mpa, don Allah a ƙayyade matsin lamba na aiki na tsarin;

Matsakaicin matsin lamba da aka yarda da shi a cikin shigarwa 0.4Mpa.

1. Tsarin daidaitawa: bai kamata ruwan da ke cikin ruwa ya zama mai lalata ba, mai ƙarfi, girman bai wuce 0.1% na girman naúrar ba, girman barbashi, 0.2mm, kamar matsakaicin ƙananan barbashi tare da lura;
2. Yanayin zafin jiki na yanayi bai wuce 40℃ ba, kuma yanayin zafi bai wuce 95% ba;
3. Daga ɓangaren injin, alkiblar juyawar famfo ta juyawar agogo.
4. Saurin da aka saba amfani da shi na na'urar shine 2900rpm da 1450rpm, lokacin amfani da wasu saurin don sadarwa, bayanin.