Bonitas installation Securus Vertical Inline ignis Pump - Horizontalis Split ignis-Pugum Pump - Liancheng

Adumbratio
Slo (W) Series Split duplex-suctu sentinam est developed sub iuncturam nisus of multorum scientificis Inquisitores Liancheng et in ex introduced German Provectus Technologies. Per test, omnes euismod Indexes accipere plumbum inter aliena similis products.

Charactrerstic
This series pump is of an horizontal and split type, with both pump casing and cover split at the central line of the shaft, both water inlet and outlet and the pump casing cast integrally, a wearable ring set in between the handwheel and the pump casing, the impeller axially fixed upon an elastic baffle ring and the mechanical seal directly mounted on the shaft, without a muff, greatly lowering the work of repair. The shaft is made of stainless steel or the 40Cr, the packing sealing structure is set with a muff to prevent the shaft from worn-out, the bearings are an open ball bearing and a cylindrical roller bearing ,and axially fixed upon a baffle ring, there is no thread and nut on the shaft of single-stage double-suction pump so the moving direction of the pump can be changed at will without need to replace it and the impeller is made of copper.

Applicatio
System Spertinler
Industria ignis-pugna ratio

Specificatio
Q: 18-1152M III / h
H: 0.3-2MPA
T: -20 ℃ ~ LXXX ℃
P: Carl 25Bar

Vexillum
Hoc serie sentinam propinquos meos in signa GB6245