Fire Pump

Product Category

Double-suction fire pump set

Product Code

XBD-SLOW(2)

Product Overview

XBD's new generation single-stage single-suction and double-stage double-suction fire pump sets can transport liquids that contain no solid particles below 80℃ or have physical and chemical properties similar to clear water, and are mainly used for supplying water to fixed fire fighting systems (fire hydrant fire extinguishing systems, automatic sprinkler fire extinguishing systems and water mist fire extinguishing systems, etc.) in industrial and civil buildings. XBD's new generation of fire pump sets are numerous and reasonable, and there are one or more pump types that meet the design requirements in fire places that meet different working conditions, which greatly reduces the difficulty of type selection.

xbd-slow
Fire pump1
Fire pump
/fire-pump-page/
XBD-SLOW2

Product Features

Performance Range

1. Flow range: 25~325 L/s
2. Pressure range: 0.3~2.5MPa
3. Speed: 1490 r/min. 2980 r/min
4. Voltage: 380V, 6kV, 10kV

Working Conditions

Temperature range: Liquid maximum temperature ≤ 80℃, Ambient temperature ≤ 40℃
Transport medium: clean water
Maximum allowable inlet pressure: 0.4MPa
Pump inlet/outlet diameter: DN80~DN400mm(Flange standard: GB/T 17241.6)
Structural style: Single-stage double-suction horizontal middle-opening horizontal type and double-stage double-suction horizontal middle-opening horizontal type

Main Application

XBD new generation horizontal single-stage double-suction and double-stage double-suction fire pumps can be used to transport liquids below 80℃ that do not contain solid particles or have physical and chemical properties similar to clear water, as well as slightly corrosive liquids.
This series of pumps are mainly used for the water supply of fixed fire protection systems (fire hydrant fire extinguishing system, automatic sprinkler fire extinguishing system and water mist fire extinguishing system, etc.) in industrial and civil buildings. The performance parameters of XBD new generation horizontal single-stage double-suction and double-stage double-suction fire pumps meet the requirements of fire fighting and mining, taking into account the industrial and mining requirements of domestic (production) water supply. This product can be used not only for independent fire fighting water supply system, but also for fire fighting, domestic (production) shared water supply system, and also for buildings, municipal, industrial and mining water supply and drainage, boiler water supply and other occasions.

Structural Installation Instructions

The pump shell is split axially in the middle, and the inlet and outlet flanges of the pump are cast on the lower half of the pump body below the axial line, which is vertical to the axial line and horizontal. When overhauling, it is not necessary to disassemble the inlet and outlet pipelines and motors, just open the pump cover and take out the rotor parts, which is very convenient for maintenance.
The impeller of single-stage double-suction fire pump group is composed of two single-suction impellers back to back. After dynamic balance verification, the axial position can be adjusted by the sleeve nuts or washers on both sides to balance the axial force, and the residual axial force is borne by the tail bearing, which makes the pump run more smoothly, the water flow is more balanced, the head is high, the flow is large, and the cavitation performance is good. The impeller of double-stage double-suction fire pump group adopts the first-stage double-suction and the second-stage single-suction for the first time, which improves the cavitation performance of the pump and reduces the axial size of the pump. The hydraulic part adopts double volute design, which reduces axial force and runs more smoothly.
Compact axial structure, small axial span, high shaft stiffness and stable and reliable pump operation.
Adopt rolling bearing, grease lubrication, and add oil through butter nozzle, which has simple maintenance and long service life.