Product Category
Submersible sewage pump
Product Code
WQ
Product Overview
WQ series submersible sewage pump developed by Shanghai Liancheng has absorbed the advantages of similar products at home and abroad, and has been comprehensively optimized in hydraulic model, mechanical structure, sealing, cooling, protection and control. It has good performance in discharging solidified materials and preventing fiber winding, high efficiency and energy saving, and strong possibility. Equipped with a specially developed special control cabinet, it not only realizes automatic control, but also ensures the safe and reliable operation of the motor; Various installation methods simplify the pumping station and save investment.
Product Features
1. Sealing mode: mechanical sealing.
2. Most of the impellers of pumps below 400 caliber are double-channel impellers, and a few are multi-blade centrifugal impellers. Most of the 400-caliber and above are mixed-flow impellers, and very few are double-channel impellers. The flow passage of the pump body is spacious, solids can easily pass through, and fibers are not easily entangled, which is most suitable for discharging sewage and dirt.
3. Two independent single-end mechanical seals are installed in series, and the installation mode is built-in. Compared with the external installation, the medium is less likely to leak, and the seal friction pair is more likely to be lubricated by oil in the oil chamber.
4. The motor with protection grade IP68 works in diving, and the cooling effect is the best. The winding can withstand higher temperature with class F insulation, which is more durable than ordinary motors.
5. The perfect combination of special electric control cabinet, liquid level float switch and pump protection element can realize automatic monitoring and alarm of water leakage and overheating of winding, power-off protection in case of short circuit, overload, phase loss and voltage loss, without unattended operation, and you can choose from auto-buck start and electronic soft start, which can ensure your safe, reliable and worry-free use of the pump in all directions.
Performance Range
1. Speed: 2950r/min, 1450 r/min, 980 r/min, 740 r/min, 590r/min, 490 r/min
2. Voltage: 380V
3. Bore: 80~600 mm
4. Flow range: 5~8000m3/h
5. Head range: 5~65m
Working Conditions
1. Medium temperature: ≤40℃, Medium density:≤1050kg/m³, PH: 4~10, Solid content ≤ 2%.
2. The main parts of the pump are made of cast iron or ductile iron, which can only pump the medium with slight corrosion, but not the medium with strong corrosion or strong abrasive solid particles.
3. Minimum operating liquid level: see ▼ (with motor cooling system) or △ (without motor cooling system) in the installation dimension drawing.
4. The diameter of solids in the medium should not be greater than the minimum size of the flow channel, and it is recommended to be less than 80% of the minimum size of the flow channel. See the "main parameters" of pumps of various specifications in the sample book for the flow channel size. $ The length of medium fiber should not be greater than the discharge diameter of the pump.
Main Application
Submersible sewage pump is mainly used in municipal engineering, building construction, industrial sewage, sewage treatment and other industrial occasions. Discharge sewage, waste water, rainwater and urban domestic water with solid particles and various fibers.
Structural Installation Instructions
1. Automatic coupling installation.
2. Fixed wet installation.
3. Fixed wet installation.
4. No installation method, that is, the water pump does not need to be equipped with coupling device, fixed wet base and fixed dry base.
If it is used to match the coupling device in the previous contract, the user should indicate it:
(1.) Matching coupling frame.
(2.) Non-matching coupling frame.
5. Seeing from the inlet of the pump body, the impeller rotates counterclockwise.